Diorama v0.66.1 ยท 2026-08-17

Info displays & alerts#

Beyond controlling devices, Diorama can turn your plan into a set of live information surfaces โ€” value readouts, a wall calendar, TV screens, a temperature heat-map, and a house-wide alert bell. This page covers the glanceable "what's going on" features.

Info cards#

The Info (๐Ÿ”ข) tool places a value plaque that shows the live state of any Home Assistant entity as crisp text โ€” a temperature, a person's location, a sensor reading, anything. It generalizes the environmental-sensor chip to every domain.

  • Bind any entity, or set the card to a clock or date mode that needs no binding at all.
  • Formatting โ€” choose precision, a unit, prefix/suffix, and how binary and enumerated states read.
  • Color rules โ€” add value rules (less-than, greater-than, between, contains, matches) that recolor the card or make it flash when a reading crosses a threshold, so a card can turn red when a freezer warms up.
  • Placement โ€” a card can face the camera (billboard) or mount flat on a wall, and it snaps flush to the nearest wall on drop.

Info cards are display-only โ€” clicking one just selects it for editing. They have their own info layer.

Action buttons#

The Action (๐Ÿ”˜) tool places a button that fires a configurable Home Assistant service when tapped โ€” a "goodnight" scene, a script, an automation, a scene, or any custom domain.service with your own data.

  • Any action โ€” pick the action kind and its target, or write a custom service call with JSON service data (validated inline).
  • Mounting โ€” wall-plate, or a free-standing table / floor puck.
  • Confirm โ€” turn on a confirmation prompt for destructive actions.
  • Feedback โ€” the cap depresses and pulses a ring on press, the sidebar shows a "fired N ago" line, and nearby figures react with a thought bubble.

Action buttons ride the switches layer. In Kiosk mode they fire; in View mode they are inert. A quick Test button in the sidebar lets you try the action while editing.

Logical-state lights#

A light doesn't have to be bound to a light. entity โ€” you can drive its on/off, color, and flash from any entity's value using the same rule engine info cards use. Add a Logic binding in the Lights editor: pick a source entity, write value rules (each with a color, and optionally a flash), and set an off-color. The light then lights up and colors itself from the matched rule, with no light. entity involved โ€” perfect for turning a decorative fixture into a status indicator. A logic light is read-only (clicking does nothing โ€” its state is computed).

Wall calendar#

The Calendar (๐Ÿ“…) tool places a read-only wall plaque bound to one or more calendar. entities. It shows a today-accented header and the next upcoming event, with the full agenda fetched periodically from Home Assistant (calendars don't push their whole agenda, so Diorama polls every few minutes). Bind several calendars to a single panel to merge them. The panel is display-only โ€” the sidebar section is where you configure it.

TV screen surfaces#

A TV or wall-TV in your plan can show more than now-playing art. In the TV furniture editor, pick a Screen mode:

  • News ticker โ€” bind a headline sensor (an RSS/feed sensor or an event entity) and the screen scrolls its headlines, rotating through them.
  • Weather on TV โ€” a mini weather card drawn from your weather source and forecast (no binding needed).

Whenever the TV is actually presenting media, the now-playing card always wins and hides the surface. A small ๐Ÿ“ฐ / โ›… line appears under the TV in 2D as a glanceable hint.

Per-room temperature heat-map#

Turn on the Temperature heat-map layer (off by default) to tint each room by its temperature. Diorama averages the temperature-kind environmental sensors placed inside a room's walls, plus any thermostat sitting in that room, and fills the room on a five-band cold-to-hot ramp (blue โ†’ cool cyan โ†’ faint comfort green โ†’ warm amber โ†’ hot red) around a comfort band you set in Settings โ–ธ Display (default 20โ€“24 ยฐC, shown in ยฐF when you use imperial units). Rooms with no temperature sensor render nothing โ€” an unknown room is left blank rather than guessed. The fill and a centroid temperature label show in 2D, and translucent patches show in 3D.

The alert center#

A ๐Ÿ”” bell in the topbar surfaces Home Assistant's "needs a human's attention" streams โ€” persistent notifications and the Repairs issue registry โ€” in one place. The bell carries a severity-tinted unread badge and pulses when a new alert arrives; clicking it opens a dropdown of alert rows (newest and most severe first) with relative times, a Dismiss / Ignore action per source, and a deep-link into Repairs.

Flight alerts land in the same bell when you enable flight tracking โ€” a low overflight, a callsign from your watch list, or the ISS rising over your house. See Neighborhood & flights.

Configure it in Settings โ–ธ Integrations โ–ธ Alert Center: per-source toggles, a minimum Repairs severity, and whether the bell shows in Kiosk / View modes (off by default, since notification text can be instance-specific). Repairs issues require an admin Home Assistant user; a non-admin kiosk simply shows fewer alerts rather than failing.

Alert beacons#

The Alert beacon (๐Ÿ””) tool places a ceiling puck bound to an alert. entity (or any binary_sensor) that pulses expanding rings while active. Click it to acknowledge a bound alert. entity. Beacons ride the sensors layer and render in Kiosk mode too, so a wall display can flash a room-level warning.